Our Blog

They are witnesses of a success story. The Audiodata “Classics” received high praise on their appearance in the trade press and were admired for their technical superiority. These models form the basis for the continued success; announced editions are consistent further developments of previous loudspeaker systems by Audiodata.


AllongéAllongé

There are almost no limits to the options provided by Allongé: placed left and right on a sideboard, two Allongé replace a pair of column speakers without compromises and form a stereo system which satisfies the highest demands.

Style
3-way speaker with 3 separate cambers,
Closed body
MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
2 woofers ø 180 mm, 39 mm voice coil
1 midrange speakers: ø 145 mm, 39 mm voice coil, magnesium-membrane
1 coaxial tweeter: ø 25 mm, calotte with silk texture membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each speaker and constructed only with low-loss air coils and condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing bi-wiring-terminal panel with 2 pairs of WBT nextgen (TM) terminals Crossover frequencies
210/2.400 Hz

Frequency range
40-25.000 Hz (-6,0 dB)
65-20.000 Hz (± 2,0 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker

Base alignment
58 ± 2 Hz

Impedance
Nominal value 4 Ohm
Minimum 2,3 Ohm at 140 Hz

Capacity
200 watts sinus

Efficiency factor
89,0 dB (1 watts/1m)

Dimensions
240 x 695 x 385 mm (H x W x D, incl. base and baffle board)

Weight
23,5 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board/base:
titanium (Nextel S774), grey (Nextel B34) or anthracite (Nextel S139)

Baffle board cladding/lateral woofer cladding:
stretch fabric, titanium, grey or black

Decorative rings:
Painted in all RAL or MV colours, Nextel micro structure lacquer

Warranty
60 months full warranty

Technical modifications reserved.


AmbianceAmbiance

The smaller sister of Avancé, equipped with the same excellent dual-coax system, fascinates in the classic stereo operation by correct timing, homogeneity and spaciousness as well as in the multi-channel operation under different conditions.

Style
3-way speaker with 3 separate cambers
Bass reflex body with an aerodynamically shaped tunnel
MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
2 woofers ø 180 mm, 39 mm voice coil
1 midrange speakers: ø 145 mm, 39 mm voice coil, magnesium-membrane
1 coaxial tweeter: ø 25 mm, calotte with silk texture membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each speaker and constructed only with low-loss air coils and condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing bi-wiring-terminal panel with 2 pairs of WBT nextgen (TM) terminals Crossover frequencies
200/2.400 Hz

Frequency range
30-25.000 Hz (-6dB)
50-20.000 Hz (± 2,0 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker

Base alignment
36 ± 2 Hz

Impedance
Nominal value 4 Ohm
Minimum 2,5 Ohm at 125 Hz

Capacity
200 watts sinus

Efficiency factor
89,0 dB (1 watts/1m)

Dimensions
1.185 x 200 x 320 mm (H x W x D)

Weight
35 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board/base:
titanium (Nextel S774), grey (Nextel B34) or anthracite (Nextel S139)

Baffle board cladding/lateral woofer cladding:
stretch fabric, titanium, grey or black

Decorative rings:
Painted in all RAL or MV colours, Nextel micro structure lacquer

Warranty
60 months full warranty

Technical modifications reserved.


AvancéAvancé

A newly developed dual-coaxial chassis where the complete tweeter is located in the acoustic centre of the midrange speaker, as well as two extremely long-stroke woofers make Avancé an exceptional speaker, which is convincing on all counts.

Style
3-way speaker with 3 separate cambers,
Bass reflex body with an aerodynamically shaped tunnel
OR
Closed body, passivee
MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
2 woofers ø 220 mm, 39 mm voice coil
1 Midrange speakers: ø 145 mm, 39 mm voice coil, magnesium-membrane
1 coaxial tweeter: ø 25 mm, calotte with silk texture membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each speaker and constructed only with low-loss air coils and condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing bi-wiring-terminal panel with 2 pairs of WBT nextgen (TM) terminals OR Tri-wiring terminal panel with 3 pairs of WBT nextgen (TM) terminals according to choice Crossover frequencies
180/2.400 Hz

Frequency range
25-25.000 Hz (-6dB)
40-20.000 Hz (± 2,0 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker

Base alignment
30 ± 2 Hz (with bass reflex body)
33 ± 2 Hz (with closed body)

Impedance
Nominal value 4 Ohm
Minimum 2,5 Ohm at 250 Hz

Capacity
200 watts sinus

Efficiency factor
89,0 dB (1 watts/1m)

Dimensions
1.250 x 200/280 (front/back) x 395 mm (H x W x D)

Weight
48 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board/base:
Titanium (Nextel S774), grey (Nextel B34) or anthracite (Nextel S139)

Baffle board cladding/lateral woofer cladding:
Stretch fabric, titanium, grey or black

Decorative rings:
Painted in all RAL or MV colours, Nextel micro structure lacquer

Warranty
60 months full warranty

Technical modifications reserved.

Style
Partially active 3-way speaker with 3 separate cambers, closed body with sensor-controlled individual regulation of both woofers (can also be upgraded)
MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
2 woofers ø 220 mm, 39 mm voice coil with separate, inductive speed sensor,
carbon-fibre membrane
1 Midrange speakers: ø 145 mm, 39 mm voice coil, magnesium-membrane
1 coaxial tweeter: ø 25 mm, calotte with silk texture membrane

Electronic components
2 output stages à 180 Watt/4 Ohm = 360 Watt overall performance,
broadband proportional regulation with motion sensor

Frequency crossover
Active filter 2. and 3. order (12/18 dB)
as well as
passivee filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each speaker and constructed only with low-loss air coils and condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing bi-wiring-terminal panel with 2 pairs of WBT nextgen (TM) terminals OR Tri-wiring terminal panel with 3 pairs of WBT nextgen (TM) terminals according to choice Crossover frequencies
160/200/250 Hz in active bass range, adjustable
2.400 Hz passive

Frequency range
15-25.000 Hz (-6dB)
22-20.000 Hz (± 2,0 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker

Base alignment
actively regulated, therefore no innate resonance
20 Hz, 28 Hz, and 40 Hz, adjustable

Impedance
Nominal value 4 Ohm
Minimum 3,5 Ohm at 300 Hz

Capacity
200 watts sinus

Efficiency factor (in passive MHT component)
89,0 dB (1 watts/1m)

Dimensions
1.250 x 200/280 (front/back) x 395 mm (H x W x D)

Weight
54 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board/base:
Titanium (Nextel S774), grey (Nextel B34) or anthracite (Nextel S139)

Baffle board cladding/lateral woofer cladding:
Stretch fabric, titanium, grey or black

Decorative rings:
Painted in all RAL or MV colours, Nextel micro structure lacquer

Warranty
60 months full warranty (passive MHT)
36 months full warranty (active module)

Technical modifications reserved.


BijouBijou

Its timelessly elegant, yet still current silhouette has made this speaker a true classic. Fatigue-free long-term listening and the lack of any effects are qualities the listeners will soon not want to miss.

Style
2-way speaker with closed body
1 chamber, MDF construction,
Wall damping due to steel ball-filled inner chambers,

Chassis
Midrange bass unit: ø 175 mm, 75 mm voice coil, polypropylene membrane
Midrange tweeter: ø 19 mm, calotte with fabric membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each pair and constructed only with low-loss air coils and MKP condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing single-wiring-terminal panel with 1 pair of WBT terminal clamps or bi-wiring terminal panel with 2 pairs of WBT terminal clamps optional Crossover frequency
2.200 Hz

Frequency range
35-25.000 Hz (-6dB)
45-20.000 Hz (± 1,5 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
An individual measurement report is attached to each speaker pair

Bass adjustment
48 ± 3 Hz

Impedance
Nominal value 8 Ohm
Minimum 5,5 Ohm at 250 Hz

Capacity
130 watts sinus

Efficiency factor
85,0 dB (1 watts/1m)

Dimensions
102,0 x 24,0 x 32,0 cm

Weight
28,0 kg

Available designs
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Warranty
60 months full warranty

Technical modifications reserved.


CadeauCadeau

The Cadeau would not have become a classic would it not have been equipped with much subtlety, rhythm and this difficult to describe feeling for music, which characterises only a handful of top performance speakers.

Style
2-way speaker with integrated subwoofer
Closed body with separate chamber for midrange speakers,
MDF construction
Wall damping due to steel ball-filled inner chambers

Chassis
Subwoofer: ø 230 mm, 100 mm voice coil, polypropylene membrane
Midrange bass unit: ø 145 mm, 75 mm voice coil, polypropylene membrane
Midrange tweeter: ø 19 mm, calotte with fabric membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each pair and constructed only with low-loss air coils and MKP condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing tri-wiring-terminal panel with 3 pairs of WBT terminal clamps Crossover frequencies
180 / 2.600 Hz

Frequency range
25-25.000 Hz (-6dB)
35-20.000 Hz (± 1,5 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
An individual measurement report is attached to each speaker pair

Bass adjustment
35 ± 3 Hz

Impedance
Nominal value 8 Ohm
Minimum 5,0 Ohm at 80 Hz

Capacity
250 watts sinus

Efficiency factor
88,0 dB (1 watts/1m)

Dimensions
121,0 x 28,5 x 38,5 cm

Weight
48,0 kg

Available designs
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Warranty
60 months full warranty

Technical modifications reserved.


CarréCarré

Carré is as suitable for high calibre and home cinema and multi-channel systems which are perfectly integrated into the living ambiance as it is in combination with a high quality subwoofer as a chic dual channel solution. Carré II is equipped with a new coax chassis and a revised frequency crossover.

Style
2-way speaker with dual-coaxial chassis
a-periodically damped, ventilated body, MDF construction
high-pass filtering via body dimensioning and frequency crossover

Chassis
1 midrange bass unit ø 145 mm, 39 mm voice coil, magnesium-membrane
1 coaxial tweeter: ø 25 mm, calotte with silk texture membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each speaker and constructed only with low-loss coils and condensers
Without circuit boards with star-point shaped routing
flexible terminal panel with 1 pair of banana jacks in installation frame,
ready for flush-mounted cable connection

Crossover frequency
2.600 Hz

Frequency range
115-25.000 Hz (-6dB)
130-20.000 Hz (± 2,0 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker

Base alignment
115 ± 4 Hz

Impedance
Nominal value 4 Ohm
Minimum 3,2 Ohm at 180 Hz

Capacity
100 watts sinus

Efficiency factor
89,0 dB (1 watts/1m)

Dimensions
280 x 280 x 135 mm (H x W x D max, incl. installation frame)

Weight
3,5 kg (complete with installation frame)

Available designs
Frame:
Titanium (Nextel S774), grey (Nextel B34) or anthracite-black (Nextel S139)
Painted in all RAL or MV colours,

Installation frame:
Stainless steel V2A blanc
Titanium (Nextel S774), grey (Nextel B34) or anthracite-black (Nextel S139)
Painted in all RAL or MV colours,

Baffle board:
Titanium (Nextel S774), grey (Nextel B34) or anthracite-black (Nextel S139)
Painted in all RAL or MV colours,

Decorative rings:
Titanium (Nextel S774), grey (Nextel B34) or anthracite-black (Nextel S139)
Painted in all RAL or MV colours, Nextel micro-structure paint

Cassis cover:
Stretch fabric, titanium, grey or black

Warranty
60 months full warranty

Technical modifications reserved.


EchelleEchelle

Echelle is Audiodata’s first speaker with bass reflex opening and combines the ideal combination of as many as possible membrane surfaces at acoustically advantageously rounded baffle board edges. Echelle was revised for HIGH END 2002 and the new model was christened Echelle II for better distinction.

Style
2-way speaker. Bass reflex body with 3 separate cambers, MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
1 midrange bass unit ø 180 mm, 42 mm voice coil, coated paper membrane
1 midrange tweeter: ø 25 mm, calotte with silk texture membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each pair and constructed only with low-loss air coils and MKP condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing single-wiring-terminal panel with 1 pair of WBT terminal clamps or bi-wiring terminal panel with 2 pairs of WBT terminal clamps optional Crossover frequency
2.400 Hz

Frequency range
35 – 25.000 Hz (-6 dB)
45 – 20.000 Hz (± 1,5 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker pair

Bass adjustment
40 ± 2 Hz

Impedance
Nominal value 8 Ohm
Minimum 6,0 Ohm at 7,5 kHz

Capacity
100 watts sinus

Efficiency factor
88,0 dB (1 watts/1m)

Dimensions
1081 x 190 x 318 mm (H x W x D)

Weight
31 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board/base:
Titanium (Nextel B34), grey (Nextel B34) or anthracite-black (RAL 9011)

Baffle board cladding (optional):
stretch fabric, titanium, grey or black

Warranty
60 months full warranty

Technical modifications reserved.


ElanceElance

All details were revised for the Elance model in order to create a fascinating speaker. The result: Elance advances into new dimension of musicality and naturalness. Elance was revised for HIGH END 2002 and the new model was christened Elance II for better distinction.

Style
Closed, 2 ½-way speaker with 4 separate cambers,
MDF construction with wall damping due to steel-filled inner chambers

Chassis
1 woofer and 1 midrange bass unit: ø 180 mm, 42 mm voice coil,
paper membrane, reinforced with carbon fibre
1 Midrange tweeter: ø 28 mm, calotte with fabric membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each pair and constructed only with low-loss air coils and MKP condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing single-wiring-terminal panel with 1 pair of WBT terminal clamps or bi-wiring terminal panel with 2 pairs of WBT terminal clamps optional Crossover frequencies
180/2.100 Hz

Frequency range
35 -25.000 Hz (-6 dB)
45 – 20.000 Hz (± 1,5 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker pair

Bass adjustment
45 ± 2 Hz

Impedance
Nominal value 4 Ohm
Minimum 3,9 Ohm at 110 Hz

Capacity
200 watts sinus

Efficiency factor
90,0 dB (1 watts/1m)

Dimensions
1214 x 220 x 368 mm (H x W x D)

Weight
48 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board/base:
Titanium (Nextel B34), grey (Nextel B34) or anthracite-black (RAL 9011)

Baffle board cladding (optional):
stretch fabric, titanium, grey or black

Warranty
60 months full warranty

Technical modifications reserved.


FilouFilou

The interaction between high quality components stands for a fine resolution, yet with a sound pattern with a high-level of stability and a high fun factor. Filou was revised for HIGH END 2002 and the new model was christened Filou II for better distinction.

Style
2½-way speaker with 3 separate cambers, woofer bass reflex, midrange bass unit, closed body, MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
1 woofer and 1midrange bass unit: ø 135 mm, 25 mm voice coil, with carbon fibre membrane, both magnetically shielded
1 midrange tweeter: ø 25 mm, calotte with silk texture membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each pair and constructed only with low-loss coils and MKP condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing single-wiring-terminal panel with 1 pair of WBT terminal clamps or bi-wiring terminal panel with 2 pairs of WBT terminal clamps optional Crossover frequency
2.600 Hz

Frequency range
40 – 25.000 Hz (-6 dB)
50 – 20.000 Hz (± 1,5 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker pair

Bass adjustment
40 ± 2 Hz

Impedance
Nominal value 4 Ohm
Minimum 3,8 Ohm at 140 Hz

Capacity
80 watts sinus

Efficiency factor
88,5 dB (1 watts/1m)

Dimensions
995 x 167 x 290 mm (H x W x D)

Weight
23 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Base:
Titanium (Nextel B34), grey (Nextel B34) or anthracite-black (RAL 9011)

Baffle board cladding (optional):
stretch fabric, titanium, grey or black

Warranty
60 months full warranty

Technical modifications reserved.


JolieJolie

Equipped with a newly developed broadband chassis, Jolie provides space, timing and homogeneity at the highest level. In addition, this concept allows perfect listening also at short distances.

Style
2-way speaker with 3 separate cambers,
Bass reflex body with aerodynamically formed tunnel
MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
2 woofers ø 150 mm, 26 mm voice coil, aluminium membrane
1 broadband chassis: ø 104 mm, 20 mm voice coil, NRSC fibreglass membrane

Frequency crossover
Filter 2. order (12 dB), with phase and impedance correction, individually computer-simulated for each speaker and constructed only with low-loss air coils and condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing si-wiring-terminal panel with 1 pair of WBT nextgen (TM) terminals OR bi-wiring terminal panel with 2 pairs of WBT nextgen (TM) terminals according to choice Crossover frequency
250 Hz

Frequency range
40-22.000 Hz (-6dB)
50-19.000 Hz (± 2,0 dB)

Pair matching
better than ± 0,75 dB (left/right speaker)
better than ± 0,75 dB (absolute to reference speaker)
Individual measurement report for each speaker

Base alignment
45 ± 2 Hz

Impedance
Nominal value 4 Ohm
Minimum 2,8 Ohm at 125 Hz

Capacity
160 watts sinus

Efficiency factor
88,0 dB (1 watts/1m)

Dimensions
1.135 x 170 x 290 mm (H x W x D)

Weight
25 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board/base:
Titanium (Nextel S774), grey (Nextel B34) or anthracite-black (Nextel S139)

Baffle board cladding:
Stretch fabric, titanium, grey or black

Warranty
60 months full warranty

Technical modifications reserved.


MignonMignon

Mignon combines virtues such as homogeneity and fine resolution at the highest level with limited dimensions and outstanding design. The innovative baffle board cast from poly-quartzite is a dominating eye catcher.

Style
2-way speaker with closed body
1 chamber, MDF construction,
wall damping due to steel ball-filled inner chambers,
baffle board cast from poly-quartzite

Chassis
Midrange bass unit: ø 145 mm, 75 mm voice coil, polypropylene membrane
Midrange tweeter: ø 19 mm, calotte with fabric membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each pair and constructed only with low-loss air coils and MKP condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing single-wiring-terminal panel with 1 pair of WBT terminal clamps or bi-wiring terminal panel with 2 pairs of WBT terminal clamps optional Crossover frequency
2.200 Hz

Frequency range
55-25.000 Hz (-6dB)
90-20.000 Hz (± 1,5 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
An individual measurement report is attached to each speaker pair

Bass adjustment
68 ± 3 Hz

Impedance
Nominal value 8 Ohm
Minimum 5,4 Ohm at 250 Hz

Capacity
100 watts sinus

Efficiency factor
85,0 dB (1 watts/1m)

Dimensions
36,0 x 19,0 x 28,5 cm (including baffle board)
Pedestal: 65,0 x 25,0 x 33,5 cm

Weight
10,0 kg, Pedestal: 10,0 kg

Available designs
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Warranty
60 months full warranty

Technical modifications reserved.


PartoutPartout

A compact multi-talent with surprising bass foundation which is suitable for almost any occasion and very convincing in matters of high level stability. The mechanics of the body and the aerodynamic of the bass reflex channels as well as the damping were refined in the Partout II. Also the frequency crossover was revised.

Style
2-way speaker with a dual-coaxial chassis,
Bass reflex body with two aerodynamically formed tunnels
MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
1 midrange bass unit ø 175 mm, 39 mm voice coil , magnesium-membrane
1 coaxial tweeter: ø 25 mm, calotte with silk texture membrane
respectively magnetically shielded

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each speaker and constructed only with low-loss air coils and MKP condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing single-wiring-terminal panel with 1 pair of WBT nextgen (TM) terminals OR bi-wiring terminal panel with 2 pairs of WBT nextgen (TM) terminals according to choice Crossover frequency
2.300 Hz

Frequency range
40-25.000 Hz (-6dB)
50-20.000 Hz (± 2,0 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker

Base alignment
40 ± 2 Hz

Impedance
Nominal value 8 Ohm
Minimum 5,3 Ohm at 20 kHz

Capacity
100 watts sinus

Efficiency factor
87,5 dB (1 watts/1m)

Dimensions
483 x 200 x 320 mm (H x W x D, upright)

Weight
15,0 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board:
Titanium (Nextel S774), grey (Nextel B34) or anthracite-black (Nextel S139)

Chassis cover (optional):
Stretch fabric, titanium, grey or black

Warranty
60 months full warranty

Technical modifications reserved.


PetitPetit

With its trapeze-shaped footprint and the matching, open and delicately designed pedestal, it pleasantly sets itself apart from the humdrum of conventional speakers. Added to this are the internal values such as selected pairs of chassis and individually computer-simulated frequency crossovers.

Style
2-way speaker with closed body
1 chamber, MDF construction,
wall damping due to steel ball-filled inner chambers

Chassis
Midrange bass unit: ø 170 mm, 25 mm voice coil, polypropylene membrane
Midrange tweeter: ø 25 mm, calotte with fabric membrane

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each pair and constructed only with low-loss air coils and MKP condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing single-wiring-terminal panel with 1 pair of WBT terminal clamps Crossover frequencies
2.300 Hz

Frequency range
45-22.000 Hz (-6dB)
65-20.000 Hz (± 1,5 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
An individual measurement report is attached to each speaker pair

Bass adjustment
63 ± 3 Hz

Impedance
Nominal value 8 Ohm
Minimum 6,1 Ohm at 200 Hz

Capacity
80 watts sinus

Efficiency factor
87,0 dB (1 watts/1m)

Dimensions
35,0 x 18,0v/28,0h x 28,0 cm
Pedestal: 67,0 x 18,0v/28,0h x 28,0 cm

Weight
9,0 kg, Pedestal: 7,5 kg

Available designs
Painted in all RAL or MV colours, Nextel micro structure lacquer

Warranty
60 months full warranty

Technical modifications reserved.


PetitePetite

A multifunctional small speaker with dual coaxial driver and magnetic shielding. Perfectly suited for multi-path systems, as surveillance monitor or as a classic speaker in small to medium size rooms.

Style
2-way speaker with a dual-coaxial chassis,
Bass reflex body with two aerodynamically formed tunnels
MDF construction with wall damping due to steel ball-filled inner chambers,

Chassis
1 midrange bass unit ø 145 mm, 39 mm voice coil, magnesium-membrane
1 coaxial tweeter: ø 25 mm, calotte with silk texture membrane
respectively magnetically shielded

Frequency crossover
Filter 1. and 2. order (6/12 dB), with phase and impedance correction, individually computer-simulated for each speaker and constructed only with low-loss air coils and MKP condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing single-wiring-terminal panel with 1 pair of WBT nextgen (TM) terminals OR bi-wiring terminal panel with 2 pairs of WBT nextgen (TM) terminals according to choice Crossover frequency
2.400 Hz

Frequency range
45-25.000 Hz (-6dB)
55-20.000 Hz (± 2,0 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker

Base alignment
50 ± 2 Hz

Impedance
Nominal value 8 Ohm
Minimum 5,3 Ohm at 20 kHz

Capacity
100 watts sinus

Efficiency factor
85,5 dB (1 watts/1m)

Dimensions
380 x 170 x 245 mm (H x W x D, upright)

Weight
9,0 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board:
Titanium (Nextel S774), grey (Nextel B34) or anthracite-black (Nextel S139)

Chassis cover (optional):
Stretch fabric, titanium, grey or black

Warranty
60 months full warranty

Technical modifications reserved.


PierrotPierrot

A high-tech chassis and a long-stroke woofer with aluminium membrane ensures perfect sound also at short listening distances, which makes the Pierrot the ideal speaker for smaller rooms.

Style
2-way speaker with 2 separate cambers,
Bass reflex body with aerodynamically formed tunnel
MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
1 woofers ø 180 mm, 39 mm voice coil, aluminium membrane
1 broadband chassis: ø 104 mm, 20 mm voice coil, NRSC fibreglass membrane

Frequency crossover
Filter 2. order (12 dB), with phase and impedance correction, individually computer-simulated for each speaker and constructed only with low-loss coils and condensers
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing single-wiring inputs, banana, 4 mm Crossover frequency
280 Hz

Frequency range
45-22.000 Hz (-6dB)
55-19.000 Hz (± 2,0 dB)

Pair matching
better than ± 0,75 dB (left/right speaker)
better than ± 0,75 dB (absolute to reference speaker)
Individual measurement report for each speaker

Base alignment
50 ± 2 Hz

Impedance
Nominal value 4 Ohm
Minimum 3,4 Ohm at 125 Hz

Capacity
100 watts sinus

Efficiency factor
88,0 dB (1 watts/1m)

Dimensions
430 x 200 x 280 mm (H x W x D, upright)

Weight
13,0 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Decorative ring:
Titanium (Nextel B34), grey (Nextel B34) or black (Nextel S139)

Chassis cover (optional):
Stretch fabric, titanium, grey or black

Warranty
60 months full warranty

Technical modifications reserved.


SculptureSculpture

The Sculpture gives new dimensions to previously accepted limits and defined benchmarks. As a true reference speaker, Sculpture masters any music style and competently renders even large symphony orchestras and vast concert halls. Six powerful, incorporated output stages are managed by the high performance base range.

Style
Partially active 3 ½-way speaker with closed body
Individual regulation of all woofers
MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
6 actively regulated woofers ø 220 mm, 38 mm voice coil with separate, inductive speed sensor, carbon-fibre membrane
2 midrange speakers: ø 150 mm, 38 mm voice coil, paper membrane with integrated damping element
1 tweeter: ø 25 mm, calotte with aluminium membrane

Electronic components
6 output stages à 150 Watt/4 Ohm = 900 Watt overall performance,
broadband proportional regulation with motion sensor

Frequency crossover
Passive filter 2. order (12 dB)
and active filter 3. order (18 dB),
individually computer-simulated and constructed for each pair
Passive filter only with low-loss air coils and MKP condensers and tin foil condensers constructed
Tolerances < 1% structure of individual paths without circuit boards with optimised, star-point shaped routing bi-wiring-terminal panel with 2 pairs of gold-plated WBT terminal clamps Crossover frequencies
100/160/2.100 Hz

Frequency range
12-35.000 Hz (-6dB)
18-20.000 Hz (± 1,5 dB)

Pair matching
better than ± 0,5 dB (left/right speaker)
better than ± 0,5 dB (absolute to reference speaker)
Individual measurement report for each speaker pair

Base alignment
actively regulated, therefore no innate resonance
16 Hz, 20 Hz, 25 Hz, and 31 Hz adjustable

Impedance
Nominal value 4 Ohm,
Minimum 2,5 Ohm at 250 Hz

Capacity (in passive MHT component)
250 watts sinus

Efficiency factor
91,0 dB (1 watts/1m)

Dimensions
Corpus (Height x Width x Depth) 2110 x 250 x 540 mm
Foot (Width x Depth) 590 x 590 mm

Weight
145 kg

Available designs
All available noble wood veneers,
Bi-colour painted in all RAL, MV colours or Nextel micro structure lacquer

Warranty
60 months full warranty

Technical modifications reserved.


Soutien 2/4Soutien 2/4

The actively regulated low bass module Soutien 2+ and Soutien 4+ are clearly a cut above the subwoofer standard class. They not only spectacularly support the rendition of deep and deepest sounds, but also impressively upgrade spaciousness, tonal depth and credibility of the representation.

Style
Active speaker with closed body
Individual regulation of all chassis
MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
2 woofers ø 210mm, 38mm voice coil
with separate, inductive speed sensor,
Kevlar membrane

Electronic components
2 output stages à 180 Watt/4 Ohm = 360 Watt overall performance,
broadband proportional regulation with motion sensor

Inputs
2 symmetrical, 3-pin XLR-inputs
0.775 V (0 dBV)/20 kOhm
Sensitivity ± 10 dB adjustable
2 symmetrical high-level inputs, 4 mm
13.8 V (+25 dBV)/20 kOhm
Sensitivity ± 10 dB adjustable

Outputs
Upon request, available with passive high-pass module 80 Hz for satellite speakers

Lower frequency limit
Butterworth filter 2. order (12 dB/octave)
20 Hz adjustable
Butterworth filter 3. order (18 dB/octave)
28 Hz adjustable
Butterworth filter 4. order (24 dB/octave)
40 Hz adjustable

Upper frequency limit
Butterworth filter 3. order (18 dB/octave)
fog = 50, 63, 80, 100, 125 Hz and “open” (setup subsequently via an external device) adjustable

Phase position
All-pass 2. order
Phi = 0°, 45°, 90°, 120°, 150° and 180° (opposite phase) adjustable

Dimensions (Height x Width x Depth) (incl. cover frame and cooling element)
550 x 230 x 338 mm
removable pedestal (25mm) for horizontal set-up

Weight
22 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board/base:
titan (Nextel S774), grau (Nextel B34) oder anthrazitschwarz (Nextel S139)

Baffle board cladding:
Stoff Stretch, titan, grau, oder schwarz

Warranty
36 months full warranty

Technical modifications reserved.

Style
Active speaker with closed body
Individual regulation of all chassis
MDF construction with wall damping due to steel ball-filled inner chambers

Chassis
4 woofers ø 210mm, 38mm voice coil
with separate, inductive speed sensor,
Kevlar membrane

Electronic components
4 output stages à 180 Watt/4 Ohm = 720 Watt overall performance,
broadband proportional regulation with motion sensor

Inputs
2 symmetrical, 3-pin XLR-inputs
0.775 V (0 dBV)/20 kOhm
Sensitivity ± 10 dB adjustable
2 symmetrical high-level inputs, 4 mm
13.8 V (+25 dBV)/20 kOhm
Sensitivity ± 10 dB adjustable

Outputs
Upon request, available with passive high-pass module 80 Hz for satellite speakers

Lower frequency limit
Butterworth filter 2. order (12 dB/octave)
20 Hz adjustable
Butterworth filter 3. order (18 dB/octave)
28 Hz adjustable
Butterworth filter 4. order (24 dB/octave)
40 Hz adjustable

Upper frequency limit
Butterworth filter 3. order (18 dB/octave)
fog = 50, 63, 80, 100, 125 Hz and “open” (setup subsequently via an external device) adjustable

Phase position
All-pass 2. order
Phi = 0°, 45°, 90°, 120°, 150° and 180° (opposite phase) adjustable

Dimensions (Height x Width x Depth) (incl. cover frame and cooling element)
1090 x 230 x 338 mm
removable pedestal (25mm) for horizontal set-up

Weight
38 kg

Available designs
Frame:
All available noble wood veneers,
Painted in all RAL or MV colours, Nextel micro structure lacquer

Baffle board/base:
Titanium (Nextel S774), grey (Nextel B34) or anthracite-black (Nextel S139)

Baffle board cladding:
Stretch fabric, titanium, grey or black

Warranty
36 months full warranty

Technical modifications reserved.